manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 149 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 149

73

4

4

Features of your vehicle

Warning and indicator lights

Malfunction Indicator Lamp (MIL) 

This warning light illuminates:

僅 When you set the ignition switch or 

the ENGINE START/STOP button to 
the ON position.
- The malfunction indicator light illu

-

minates for about 3 seconds and 
then goes off.

僅 Whenever there is a malfunction with 

either the emission control system or 
the engine or the vehicle powertrain.
In this case, have your vehicle 
inspected by an authorized Kia dealer.

NOTICE

Driving with the Malfunction Indicator 
Lamp (MIL) on may cause damage to 
the emission control system which could 
affect drivability and/or fuel economy.

CAUTION

If the Malfunction Indicator Lamp (MIL) 
illuminates, potential catalytic converter 
damage is possible which could result in 
loss of engine power. In this case, have 
your vehicle inspected by an authorized 
Kia dealer as soon as possible.

Engine Oil Pressure Warning 
Light 

This warning light illuminates:

僅 When the engine oil pressure is low.
僅 Drive carefully to the nearest safe 

location and stop your vehicle.

僅 Turn the engine off and check the 

engine oil level (For more details, refer 

to "Engine oil and filter" on page 7-21). 
If the level is low, add oil as required.

僅 If the warning light remains on after 

adding oil or if oil is not available, 
have the vehicle inspected by an 
authorized Kia dealer. Continued driv

-

ing with the warning light on may 
cause engine failure.

NOTICE

When engine oil pressure decreases due 
to insufficient engine oil, etc., the Engine 
Oil Pressure warning light will illuminate.

Low Fuel Level Warning Light 

This warning light illuminates:

When the fuel tank is nearly empty.

If the fuel tank is nearly empty:

Add fuel as soon as possible.

CAUTION

Low Fuel Level

Driving with the Low Fuel Level warning 
light on or with the fuel level below “E” 
can cause the engine to misfire.

Master warning light 

This indicator light illuminates:

僅 This warning light informs the driver 

the following situations

僅 Forward Collision-Avoidance Assist 

malfunction (if equipped)

僅 Blind-Spot Collision Warning malfunc

-

tion (if equipped)

僅 Blind-Spot Collision Warning radar 

blocked (if equipped)

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments