Kia FORTE 2022 Manual Download Page 141

Page: 141 / 514

Features of your vehicle

LCD display

Warning messages

Warning messages appear on the LCD
to warn the driver. It is located in the
center of the instrument cluster.
The warning message may appear dif

ferently depending on the type of instru

ment cluster and some may not show
the warning message at all.
The warning message is shown in either
symbol, symbol and text, or text type
only.

Door, hood, Liftgate open

僅 This warning is displayed indicating

which door, or the hood, or the liftgate
is open.

Sunroof open (if equipped)

僅 This warning is displayed if you turn

off the engine when the sunroof is
open.

Window open (if equipped)

僅 This warning is displayed if you turn

off the engine when any window is
open.

Lights mode

僅 This indicator displays which exterior

light is selected using the lighting con

trol.

You can activate or deactivate Wiper/
Lights Display function from the User
Settings mode in the cluster LCD display.

OBD041287

OBD041288

OBD041294L

OBD041590L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 141 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: