Kia FORTE 2022 Manual Download Page 136

Page: 136 / 514

Features of your vehicle

LCD display

User settings mode (if equipped)

In this mode, you can change the set

tings of the instrument cluster, doors,
lamps, etc.
* The information provided may differ

depending on which functions are
applicable to your vehicle.

Shift to P to edit settings/Engage
parking brake to edit settings

This warning message appears if you try
to adjust the User Settings while driving.
僅 Dual clutch transmission, Intelligent

Variable Transmission
For your safety, change the User Set

tings after parking the vehicle, apply

ing the parking brake and moving the
shift lever to P (Park).

僅 Manual Transmission

For your safety, change the User Set

tings after parking the vehicle and
engaging the parking brake.

OBD041588L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 136 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: