manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 135 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 135

59

4

4

Features of your vehicle

LCD display

Trip computer mode

The trip computer mode displays infor

-

mation related to vehicle driving param

-

eters including Accumulated info, 
Driving information, and so on.
* For more details, refer to "Trip Com

-

puter" on page 4-68.

Turn By Turn mode (if equipped)

This mode displays the state of the navi

-

gation.

Master warning mode

This warning light informs the driver the 
following situations.
僅 Forward Collision-Avoidance Assist 

malfunction (if equipped)

僅 Blind-Spot Collision Warning malfunc

-

tion (if equipped)

僅 Blind-Spot Collision Warning radar 

blocked (if equipped)

僅 High Beam Assist malfunction
僅 Smart Cruise Control malfunction (if 

equipped)

僅 Smart Cruise Control radar blocked (if 

equipped)

僅 LED headlamp malfunction
僅 TPMS failure, low pressure (if 

equipped), etc.

At this time, a Master Warning icon 

(

) will appear on the LCD display. If 

the warning situation is solved, the mas

-

ter warning light will be turned off and 
the Master Warning icon will disappear.

OBDM041297C

OBD041579

OBD041586

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments