Kia FORTE 2022 Manual Download Page 134

Page: 134 / 514

Features of your vehicle

LCD display

Driving Assist mode

僅 Lane Keeping Assist

Smart Cruise Control (if equipped)
Lane Following Assist
Highway Driving Assist (if equipped)

僅 Driver Attention Warning
* For more details, refer to each system

information in "Driving your vehicle"
on page 5-6.

Setting (if equipped)

To change the Driver Assistance set

tings, press the OK button on the steer

ing wheel for more than 1 second when
the Driving Assist mode is displayed.

WARNING

While driving, please do not change the
settings. It may distract your attention
and cause an accident.

NOTICE

The information provided may differ
depending on which functions are appli

cable to your vehicle.

OBD041580

Item

Explanation

SCC Reaction Fast/Normal/Slow

Driving Con

venience

僅 Highway Driving Assist
僅 Highway Auto Speed

Change

Warning Tim

ing

Normal/Late

Warning Vol

ume

High/Medium/Low

Driver Atten

tion Warning

僅 Leading Vehicle

Departure Alert

僅 Inattentive Driving

Warning

Forward
Safety

Active Assist/Warning
Only/Off

Lane Safety

Assist/Warning Only/Off

Blind-Spot
Safety

僅 Safe Exit Warning
僅 Active Assist/Warning

Only/Off

Parking
Safety

Rear Cross-Traffic Safety

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 134 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: