manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 124 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 124

Features of your vehicle

48

4

Mirrors

For Telematics button function:

Telematics buttons are also located on 
the mirror.
1. Roadside Assist button
2. Local Search button
3. SOS button

Electric Chromic Mirror (ECM) (if 
equipped)

The electric rear view mirror automati

-

cally controls the glare from the head

-

lights of the vehicles behind you in 
nighttime or low light driving conditions. 
The sensor mounted in the mirror 
senses the light level around the vehicle, 
and automatically controls the headlight 
glare from the vehicles behind 
you.When the engine is running, the 
glare is automatically controlled by the 
sensor mounted in the rearview mir

-

ror.Whenever the shift lever is shifted 
into reverse (R), the mirror will automati

-

cally go to the brightest setting in order 
to improve the drivers view behind the 
vehicle.

CAUTION

When cleaning the mirror, use a paper 
towel or similar material dampened with 
glass cleaner. Do not spray glass cleaner 
directly on the mirror. It may cause the 

liquid cleaner to enter the mirror hous

-

ing.

To operate the electric rearview mirror:
僅 The mirror defaults to the ON position 

whenever the ignition switch is turned 
on.

僅 Press the ON/OFF button (1) to turn 

the automatic dimming function off. 
The mirror indicator light (2) will turn 
off.

僅 Press the ON/OFF button (1) to turn 

the automatic dimming function on. 
The mirror indicator light (2) will illu

-

minate.
* (2) : Indicator, (3) : Sensor

When the engine is running, the glare is 
automatically controlled by the sensor 
(3) mounted in the rear view mirror.

ODEEV069035CR

OBD041578L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments