Kia FORTE 2022 Manual Download Page 122

Page: 122 / 514

Features of your vehicle

Steering wheel

NOTICE

The heated steering wheel will turn off
automatically approximately 30 min

utes after the heated steering wheel is
turned on.

CAUTION

僅 Do not install any type of grip cover

for the steering wheel, it may impair
the function of the heated steering
wheel system.

僅 When cleaning the heated steering

wheel, do not use an organic solvent
such as paint thinner, benzene, alco

hol and gasoline. Doing so may dam

age the surface of the steering wheel.

僅 If the surface of the steering wheel is

damaged by a sharp object, damage
to the heated steering wheel compo

nents could occur.

WARNING

If the steering wheel becomes too warm,
turn the system off. The heated steering
wheel may cause burns even at low tem

peratures, especially if used for long
periods of time.

Horn

To sound the horn, press the area indi

cated by the horn symbol on your steer

ing wheel (see illustration).

The horn will operate only when this
area is pressed. Check the horn regularly
to be sure it operates properly.

OBD041068

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 122 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: