manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 119 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 119

43

4

4

Features of your vehicle

Sunroof

formed. Some instances where resetting 
the sunroof may be required include:
僅 When the 12-volt battery is either dis

-

connected or discharged

僅 When the sunroof fuse is replaced
僅 If the sunroof one-touch AUTO OPEN/

CLOSE operation is not functioning 
properly

Sunroof resetting procedure:
1. It is recommended to perform the 

reset procedure with the vehicle 
engine running. Start the vehicle in P 
(Park).

2. Make sure the sunroof glass is in the 

fully closed position. If the sunroof 
glass is open, push the switch forward 
until the sunroof glass is fully closed.

3. Release the switch when the sunroof 

glass is fully closed.

4. Push the switch forward until the sun

-

roof glass moves slightly. Then 
release the switch.

5. Once again push and hold the sun

-

roof switch forward until the sunroof 
glass slides open and closed. Do not 
release the switch until the operation 
is completed. If you release the switch 
during operation, start the procedure 
again from step 2.

NOTICE

If the sunroof does not reset when the 
vehicle battery is disconnected or dis

-

charged, or the sunroof fuse is blown, 
the sunroof may not operate normally.

Sunroof open warning (if 
equipped)

If the driver turns off the engine when 
the sunroof is not fully closed, the warn

-

ing chime will sound for several seconds 
and the sunroof open warning will 
appear on the cluster LCD display.
Close the sunroof securely when leaving 
your vehicle.

CAUTION

Make sure the sunroof is closed fully 
when leaving your vehicle. If the sunroof 
is left open, rain or snow may wet the 
interior of the vehicle. Also, leaving the 
sunroof open when the vehicle is unat

-

tended may invite theft.

OBD041288

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments