manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 115 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 115

39

4

4

Features of your vehicle

Fuel filler door

WARNING

Portable fuel container

When using an approved portable fuel 
container, be sure to place the container 
on the ground prior to refueling. Static 
electricity discharge from the container 
can ignite fuel vapors causing a fire. 
Once refueling has begun, contact with 
the vehicle should be maintained until 
the filling is complete. Use only 
approved portable plastic fuel contain

-

ers designed to carry and store gasoline.

WARNING

Cell phone fires

Do not use cellular phones while refuel

-

ing. Electric current and/or electronic 
interference from cellular phones can 
potentially ignite fuel vapors causing a 
fire.

WARNING

Refueling & Vehicle fires

When refueling, always shut the engine 
off. Sparks produced by electrical com

-

ponents related to the engine can ignite 
fuel vapors causing a fire. Once refuel

-

ing is complete, check to make sure the 
filler cap and filler door are securely 
closed, before starting the engine.

WARNING

Smoking

DO NOT use matches or a lighter and 
DO NOT SMOKE or leave a lit cigarette 
in your vehicle while at a gas station 
especially during refueling. Automotive 
fuel is highly flammable and can, when 
ignited, result in fire.

Make sure to refuel your vehicle accord

-

ing to "Fuel requirements" on page 1-2.
If the fuel filler cap requires replace

-

ment, use only a genuine Kia cap or the 
equivalent specified for your vehicle. An 
incorrect fuel filler cap can result in a 
serious malfunction of the fuel system or 
emission control system.

CAUTION

Exterior paint

Do not spill fuel on the exterior surfaces 
of the vehicle. Any type of fuel spilled on 
painted surfaces may damage the paint.

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments