manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 95 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 95

4 21

Features of your vehicle

Opening the trunk

• Press the trunk unlock button for

more than 1 second on the trans-
mitter (or smart key).

• Press the button on the trunk han-

dle with the smart key in your pos-
session.
Once the trunk is opened and then
closed, the trunk locks automati-
cally.

• To open the trunk from inside the

vehicle, pull the trunk lid release
lever.
Once the trunk is opened and then
closed, the trunk locks automati-
cally.

✽

✽

NOTICE

In cold and wet climates, trunk lock
and trunk mechanisms may not work
properly due to freezing conditions.

TRUNK (4 DOOR)

OYDDCO2014

OYDM046003N

CAUTION

Make certain that you close the
trunk before driving your vehi-
cle. Possible damage may occur
to attached hardware if the trunk
is not closed prior to driving.

WARNING

The trunk swings upward. Make
sure no objects or people are
near the rear of the vehicle
when opening the trunk.

YDM USA 4a.QXP  2016-05-03  17:24  Page 21

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments