manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 68 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 68

3 51

Safety features of your vehicle

Why didn’t my air bag go off in
a collision? (Inflation and non-
inflation conditions of the air
bag)

There are many types of accidents
in which the air bag would not be
expected to provide additional
protection.
These include rear impacts, sec-
ond or third collisions in multiple
impact accidents, as well as low
speed impacts.

Air bag collision sensors

(1) SRS control module /

Rollover sensor

(2) Front impact sensor

(3) Side impact sensor
(4) Pressure side impact sensor

OYDM036004/OYDDSA2029/OYDM036006/OYDDSA2031

1

2

3

YDM USA 3.QXP  5/1/2016  12:43 PM  Page 51

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments