manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 573 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 573

8 11

Specifications, Consumer information, Reporting safety defects

The tires supplied on your new vehi-
cle are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side center pillar gives the tire pres-
sures recommended for your vehicle.

The engine number is stamped on
the engine block as shown in the
drawing.

The refrigerant label is located on
the underside of the hood.
The label contains the following infor-
mation :
• Type of refrigerant
• Amount of refrigerant

REFRIGERANT LABEL

TIRE SPECIFICATION AND
PRESSURE LABEL

OYDEMC2057

OMD0620012N

ENGINE NUMBER

OJF085004

■

Gasoline 2.0 Engine

■

Gasoline 1.6 T-GDI Engine

OQLE085010

YDM USA 8.QXP  5/1/2016  1:28 PM  Page 11

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments