Kia Forte 2014 Owner'S Manual Download Page 572

Page: 572 / 592

Specifications, Consumer information, Reporting safety defects

VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number
(VIN) is the number used in register-
ing your vehicle and in all legal mat-
ters pertaining to its ownership, etc.

VIN label

The VIN is also on a plate attached
to the top of the dashboard. The
number on the plate can easily be
seen through the windshield from
outside.

The vehicle certification label
attatched on the driver’s side center
pillar gives the vehicle identification
number (VIN).

OBH088005N

VIN Label

OFS080001

OFS080002

VEHICLE CERTIFICATION-
LABEL

Frame Number

YDM USA 8.QXP 5/1/2016 1:28 PM Page 10

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Forte 2014

Reviews:

Kia Forte 2014, Owner'S Manual, Page: 572 / 592

Search results

Summary of Contents for Forte 2014

Reviews: