manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 55 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 55

Safety features of your vehicle

38

3

Air bag warning light

The purpose of the air bag warning
light in your instrument panel is to
alert you of a potential problem with
your air bag - Supplemental Restraint
System (SRS).
When the ignition switch is turned
ON, the indicator light should illumi-
nate for approximately 6 seconds,
then go off.

Have the system checked by an
authorized Kia dealer if:
• The light does not turn on briefly

when you turn the ignition ON.

• The light stays on after illuminating

for approximately 6 seconds.

• The light comes on while the vehi-

cle is in motion.

SRS components and func-
tions

The SRS consists of the following
components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side air bag modules
4. Curtain air bag modules
5. Retractor pre-tensioner assem-

blies*

6. Air bag warning light
7. SRS control module (SRSCM) /

Rollover sensor

W7-147

OTF032049N

YDM USA 3.QXP  5/1/2016  12:43 PM  Page 38

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments