Kia Forte 2014 Owner'S Manual Download Page 543

Page: 543 / 592

7 81

Maintenance

5.Remove the bulb-socket from the

housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.

6.Install the new bulb-socket into the

housing by aligning the tabs on the
socket with the slots in the hous-
ing.
Push the socket into the housing
and turn the socket clockwise.

7.Connect the power connector.
8.Reinstall the front under cover.

Outside Mirrors with Turn
Signal Indicators (if equipped)

If the light (LED) does not operate,
have the vehicle checked by an
authorized Kia dealer

Rear combination lamp bulb
replacement

(1) Tail and Stop and Side marker lamp
(2) Tail and Side marker lamp
(3) Tail lamp
(4) Stop lamp
(5) Back up lamp
(6) Rear turn signal lamp

OYDDMC2017

OYDM076079

OYDM076080

• 4 Door

Type A

• 4 Door

Type B

YDM USA 7.QXP 5/1/2016 1:25 PM Page 81

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Forte 2014

Reviews:

Kia Forte 2014, Owner'S Manual, Page: 543 / 592

Search results

Summary of Contents for Forte 2014

Reviews: