manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 523 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 523

7 61

Maintenance

FUSES

A vehicle's electrical system is protect-
ed from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one
located in the driver's side panel bol-
ster, others in the engine compart-
ment near the battery.
If any of your vehicle's lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the fuse
will be melted.
If the electrical system does not work,
first check the driver's side fuse panel.
Always replace a blown fuse with one
of the same rating.
Before replacing a blown fuse, move
to safe place, turn off the engine and
all electric devices, and disconnect the
negative battery cable.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and we rec-
ommend that you consult an author-
ized Kia dealer.
Four kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type,  battery fuse terminal and
multi fuse type for higher amperage
ratings.

Do not arbitrarily modify or add-on
electric wiring to the vehicle.

WARNING 

- Fuse replace-

ment

• Never replace a fuse with any-

thing but another fuse of the
same rating.

• A higher capacity fuse could

cause damage and possibly a
fire.

• Never install a wire or aluminum

foil instead of the proper fuse -
even as a temporary repair. It
may cause extensive wiring
damage and a possible fire.

CAUTION 

- Fuse replace-

ment

Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.

OXM073122

Normal

Normal

■

Blade type

■

Cartridge type

■

Multi fuse

Blown

Blown

Normal

Blown

Normal

Blown

YDM USA 7.QXP  5/1/2016  1:24 PM  Page 61

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments