Kia Forte 2014 Owner'S Manual Download Page 504

Page: 504 / 592

Maintenance

Front windshield wiper blade

Type A

1. Raise the wiper arm and turn the

wiper blade assembly to expose
the plastic locking clip.

2. Compress the clip (1) and slide

the blade assembly downward (2).

3. Lift it off the arm.
4. Install the blade assembly in the

reverse order of removal.

Type B

1. Raise the wiper arm.

1LDA5023

CAUTION -

Wiper arms

Do not allow the wiper arm to
fall against the windshield,
since it may chip or crack the
windshield.

1JBA7037

1JBA7038

OHM078059

YDM USA 7.QXP 5/1/2016 1:24 PM Page 42

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Forte 2014

Reviews:

Kia Forte 2014, Owner'S Manual, Page: 504 / 592

Search results

Summary of Contents for Forte 2014

Reviews: