manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 487 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 487

7 25

Maintenance

SEVERE DRIVING CONDITIONS
A - Repeatedly driving short distance of less than 5 miles (8 km)

in normal temperature or less than 10 miles (16 km) in freez-
ing temperature

B - Extensive engine idling or low speed driving for long dis-

tances

C- Driving on rough, dusty, muddy, unpaved, graveled or salt-

spread roads

D- Driving in areas using salt or other corrosive materials or in

very cold weather

E - Driving in heavy dust condition

F - Driving in heavy traffic area
G- Driving on uphill, downhill, or mountain road
H- Towing a Trailer, or using a camper, or roof rack
I - Driving as a patrol car, taxi, other commercial use or vehicle

towing

J - Driving over 106 mph (170 km/h)
K - Frequently driving in stop-and-go conditions

MAINTENANCE ITEM

MAINTENANCE

OPERATION

MAINTENANCE INTERVALS

DRIVING 

CONDITION

FRONT DISC BRAKE/PADS, CALIPERS
AND ROTORS

I

MORE FREQUENTLY

C, D, G, H

REAR DISC BRAKE/PADS, PARKING
BRAKE

I

MORE FREQUENTLY

C, D, G, H

STEERING GEAR BOX, LINKAGE &
BOOTS/LOWER ARM BALL JOINT, UPPER
ARM BALL JOINT

I

MORE FREQUENTLY

C, D, E, F, G, H, I

DRIVE SHAFTS AND BOOTS

I

EVERY 7,500 MILES (12,000 KM) OR 6

MONTHS

C, D, E, F, G, H, I, J

CLIMATE CONTROL AIR FILTER (FOR
EVAPORATOR AND BLOWER UNIT)

R

MORE FREQUENTLY

C, E

YDM USA 7.QXP  5/1/2016  1:23 PM  Page 25

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments