manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 434 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 434

What to do in an emergency

2

6

ROAD WARNING 

Hazard warning flasher  

The hazard warning flasher serves
as a warning to other drivers to exer-
cise extreme caution when
approaching, overtaking, or passing
your vehicle.

It should be used whenever emer-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ignition switch in any position. The
flasher switch is located in the center
console switch panel. All turn signal
lights will flash simultaneously.

• The hazard warning flasher oper-

ates whether your vehicle is run-
ning or not.

• The turn signals do not work when

the hazard flasher is on.

• Care must be taken when using

the hazard warning flasher while
the vehicle is being towed.

OYDEEM2001CN

YDM USA 6.QXP  5/1/2016  1:21 PM  Page 2

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments