Home
/
Kia
/
Forte 2014
/
Owner'S Manual

Kia Forte 2014, Owner'S Manual, Page: 329 / 592

Share

Page: 329 / 592

Kia Forte 2014 Owner'S Manual Download Page 329

Media Display

This feature is used to change the
information displayed within USB
and MP3 CD modes.
• Folder File: Displays file name and

folder name.

• Album Artist Song: Displays album

name/artist name/song name.

With the Sound Button

Press the [SETUP] button

Select

[Sound].
You can select and control options
related to [Sound Setting], [Speed
Dependent Vol.], [Voice Recognition
Vol.] and [Touch Screen Beep].

Sound Setting

Use the [Up/Down/Left/Right] to
adjust the Fader/Balance settings.
Use the [Left/Right] to adjust the
Bass/Middle/Treble settings.
Press the [Default] to reset.

Features of your vehicle

4 255

YDM USA 4b (AUDIO).QXP 5/1/2016 1:07 PM Page 255

«
...
327
328
329
330
331
...
»

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments