manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 286 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 286

4 212

Features of your vehicle

✽

✽

NOTICE - 

Using an iPod

®

• iPod

®

is a registered trademark of

Apple Inc.

• In order to use the iPod

®

with

your vehicle's audio system, you
must use a dedicated iPod

®

cable.

(the cable that is supplied when
purchasing iPod

®

/iPhone

®

prod-

ucts)

• If the iPod

®

is connected to the

vehicle while it is playing, a high
pitch sound could occur

for

approximately 1-2 seconds imme-
diately after connecting. If possi-
ble, connect the iPod

®

to the vehi-

cle with the iPod

®

stopped/paused.

• When the vehicle ignition is set to

ACC or ON, connecting the iPod

®

through the iPod

®

cable will

charge the iPod

®

through the car

audio system.

• When connecting with the iPod

®

cable, make sure to fully insert the
jack to prevent communication
interference.

(Continued)

(Continued)
• When the EQ features of an exter-

nal device, such as the iPod

®

, and

the audio system are both active,
EQ effects could overlap and
cause sound deterioration and dis-
tortion. Whenever possible, turn
off the EQ feature within the
external device when it is connect-
ed to the audio system.

• Noise may occur when an iPod

®

or

AUX device is connected. When
such devices are not being used,
disconnect the device for storage.

• When the iPod

®

or AUX device

power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection
before use.

• Skipping or improper operation

may occur depending on the char-
acteristics of your iPod

®

/iPhone

®

device.

(Continued)

(Continued)
• If your iPhone

®

is connected to

both the 

Bluetooth

®

Wireless

Technology and USB, the sound
may not be properly played. In
your iPhone

®

, select the Dock con-

nector or

Bluetooth

®

Wireless

Technology to change the sound
output (source).

• iPod

®

mode cannot be operated

when the iPod

®

cannot be recog-

nized due to versions that do not
support communication protocols. 

• For fifth generation iPod

®

Nano

devices, the iPod

®

may not be rec-

ognized when the battery level is
low. Please charge the iPod

®

for

use. 

• The search/play orders shown

within the iPod

®

device may differ

from the orders shown within the
audio system.

• If the iPod

®

malfunctions due to

an iPod

®

device defect, reset the

iPod

®

and try again. (To learn

more, refer to your iPod

®

manual)

(Continued)

YDM USA 4b (AUDIO).QXP  5/1/2016  1:07 PM  Page 212

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments