Kia Forte 2014 Owner'S Manual Download Page 277

Page: 277 / 592

203

Features of your vehicle

Turning Bluetooth System Off

Press the [SETUP] button

Select

[Phone]

Select [Bluetooth System

Off].
Once

Bluetooth

Wireless Technology

is turned off,

Bluetooth

Wireless

Technology related features will not
be supported within the audio sys-
tem.
• To turn

Bluetooth

Wireless Technology

back on, go to [SETUP] button

[Phone] and select “Yes”.

With the System Button

Press the [SETUP] button

Select

[System].

Memory Information

Displays currently used memory and
total system memory.
Select [Memory Information]

[OK].

The currently used memory is dis-
played on the left side while the total
system memory is displayed on the
right side.

YDM USA 4b (AUDIO).QXP 5/1/2016 1:07 PM Page 203

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Forte 2014

Reviews:

Kia Forte 2014, Owner'S Manual, Page: 277 / 592

Search results

Summary of Contents for Forte 2014

Reviews: