manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 242 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 242

4 168

Features of your vehicle

✽

✽

NOTICE - 

Using the
Bluetooth

®

Wireless

Technology Cellular
Phone

•

Bluetooth

®

Wireless Technology

Handsfree refers to a device which
allows the user to conveniently
make phone calls with 

Bluetooth

®

Wireless Technology mobile
phones through the audio system.

•

Bluetooth

®

Wireless Technology

allows devices to be connected in a
short distance, including hands-
free devices, stereo headsets, wire-
less remote controllers, etc. For
more information, visit the

Bluetooth

®

Wireless Technology

website at www.Bluetooth.com.
Before using 

Bluetooth

®

Wireless

Technology audio features.

• The Bluetooth

®

word mark and

logos are registered trademarks
owned by Bluetooth

®

SIG, Inc. and

any use of such marks by Kia is
under license. Other trademarks
and trade names are those of their
respective owners. A Bluetooth

®

enabled cell phone is required to
use 

Bluetooth

®

Wireless Technology.

(Continued)

(Continued)
•

Bluetooth

®

Wireless Technology

features supported within the
vehicle are as follows. Some fea-
tures may not be supported
depending on your

Bluetooth

®

Wireless Technology device.
- Answering and placing

Bluetooth

®

Wireless Technology

Handsfree calls

- Menu operation during call

(Switch to Private, Switch to call
waiting, Outgoing volume)

- Download Call History
- Download Mobile Phone book
- Phone book/Call History Auto

Download

-

Bluetooth

®

Wireless Technology

device auto connection

-

Bluetooth

®

Wireless Technology

Audio

• Before using 

Bluetooth

®

Wireless

Technology related features of the
audio system, refer your phone’s
User’s Manual for phone-side

Bluetooth

®

Wireless Technology

operations.

(Continued)

(Continued)
• The phone must be paired to the

audio system to use 

Bluetooth

®

Wireless Technology related fea-
tures.

• Pairing and connecting a

Bluetooth

®

Wireless Technology

enabled mobile phone will work
only when the 

Bluetooth

®

Wireless

Technology option within your
mobile phone has been turned on.
(Methods of turning on the

Bluetooth

®

Wireless Technology

enabled feature may differ
depending on the mobile phone.)

• Do not use a cellular phone or per-

form 

Bluetooth

®

Wireless Technology

settings (e.g. pairing a phone)
while driving.

• Even if the phone supports

Bluetooth

®

Wireless Technology,

the phone will not be found during
device searches if the phone has
been set to hidden state or the

Bluetooth

®

Wireless Technology

power is turned off. Disable the
hidden state or turn on the

Bluetooth

®

Wireless Technology

power prior to searching/connect-
ing with the car audio system.

(Continued)

YDM USA 4b (AUDIO).QXP  5/1/2016  1:06 PM  Page 168

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments