manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 22 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 22

3 5

Safety features of your vehicle

Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up the

seatback recline lever.

2. Carefully lean back on the seat

and adjust the seatback of the
seat to the position you desire.

3. Release the lever and make sure

the seatback is locked in place.
(The lever MUST return to its orig-
inal position for the seatback to
lock.)

Seat Cushion height 
(for driver's seat)

To change the height of the seat
cushion push the lever upwards or
downwards.
• To lower the seat cushion, push the

lever down several times.

• To raise the seat cushion, push the

lever up several times.

Lumbar support 
(for driver`s seat, if equipped)

Press the front portion of the switch to
increase support, or the rear portion
of the switch to decrease support.

OYDDSA2004

OYDDSA2003

OYDDSA2008

YDM USA 3.QXP  5/1/2016  12:41 PM  Page 5

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments