manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 172 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 172

Features of your vehicle

98

4

Rear window wiper and wash-
er switch (5 door) (if equipped)

The rear window wiper and washer
switch is located at the end of the
wiper and washer switch lever. Turn
the switch to desired position to
operate the rear wiper and washer.
ON - Normal wiper operation
INT - Intermittent wipe 
OFF - Wiper is not in operation

Push the lever away from you to
spray rear washer fluid and to run the
rear wipers 1~3 cycles. The spray
and wiper operation will continue
until you release the lever.

OAM049103N

OYD044500

YDM USA 4a.QXP  2016-05-03  17:28  Page 98

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments