Kia Forte 2014 Owner'S Manual Download Page 150

Page: 150 / 592

Features of your vehicle

Warning lights

✽

NOTICE -

Warning lights

Make sure that all warning lights
are OFF after starting the engine. If
any light is still ON, this indicates a
situation that needs attention.

Air bag Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, have your vehicle
inspected by an authorized Kia
dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.
For more details, refer to the "Seat
Belts" in chapter 3.

WARNING AND INDICATOR LIGHTS

YDM USA 4a.QXP 2016-05-03 17:27 Page 76

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Forte 2014

Reviews:

Kia Forte 2014, Owner'S Manual, Page: 150 / 592

Search results

Summary of Contents for Forte 2014

Reviews: