manualshive.com logo in svg

Kia Forte 2014, Owner'S Manual, Page: 102 / 592

Share
Download
Kia Forte 2014 Owner'S Manual Download Page 102

Features of your vehicle

28

4

Emergency tailgate safety
release

Your vehicle is equipped with the
emergency tailgate safety release
lever located on the bottom of the
tailgate. When someone is inadver-
tently locked in the luggage compart-
ment. The tailgate can be opened by
doing as follows:
1. Input the machanical key into the

hole.

2. Push the machanical key to the

right.

3. Push up the tailgate.

WARNING

- 

Exhaust
fumes

If you drive with the tailgate
open, you will draw dangerous
exhaust fumes into your vehicle
which can cause serious injury
or death to vehicle occupants.
If you must drive with the tail-
gate open, keep the air vents
and all windows open so that
additional outside air comes
into the vehicle.

WARNING

- 

Riding in
cargo area

Occupants should never ride in
the rear cargo area where no
restraints are available. To avoid
injury in the event of an accident
or sudden stops, occupants
should always be properly
restrained.

CAUTION

Make sure nothing is near the
tailgate latch and striker while
closing the tailgate. It may dam-
age the tailgate's latch.

OYDDCO3234

YDM USA 4a.QXP  2016-05-03  17:25  Page 28

Summary of Contents for Forte 2014

















































































































































































































































































































































































































































































































































































































Reviews:

No comments