manualshive.com logo in svg

Kia Forte 2011, Owner'S Manual, Page: 291 / 342

Share
Download
Kia Forte 2011 Owner'S Manual Download Page 291

Maintenance

16

7

G070200ATD

Changing the coolant

Have the coolant changed by an author-
ized KIA dealer according to the
Maintenance Schedule at the beginning
of this section.

WARNING - 

Radiator cap

Do not remove the radiator cap
when the engine and radiator are
hot. Scalding hot coolant and
steam may blow out under pres-
sure causing serious injury.

CAUTION

Put a thick cloth or fabric around
the radiator cap before refilling the
coolant in order to prevent the
coolant from overflowing into
engine parts such as the alternator.

WARNING -

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when sprayed
on the windshield and may cause
loss of vehicle control or damage
to paint and body trim.

OMG075006

Summary of Contents for Forte 2011























































































































































































































































































































































Reviews:

No comments