manualshive.com logo in svg

Kia Forte 2011, Owner'S Manual, Page: 195 / 342

Share
Download
Kia Forte 2011 Owner'S Manual Download Page 195

4 121

Features of your vehicle

6. TUNE Knob and ENTER Button

While listening to SIRIUS broadcast,
rotate this knob to the right or left to
search other channels while listening to
current channels and push this knob to
select what you want to listen to.
(Turn to the right to search higher chan-
nels and left lower channels)

7. Preset Selection Button

• Push [1]~[6] buttons less than 0.8 sec-

ond to play the channel saved in each
button.

• Hold down the [PRESET] button for 0.8

second or longer to save current chan-
nel. An audible beep will play to confirm
the preset is stored.

✽

✽

Troubleshooting

1. Antenna Error

If this message is displayed, the anten-
na or antenna cable is broken or
unplugged. Please consult with your
Kia dealership. 

2. Acquiring Signal 

If this message is displayed, it means
that the antenna is covered and that
the SIRIUS Satellite Radio signal is
not available. Ensure the antenna is
uncovered and has a clear view of the
sky.

Summary of Contents for Forte 2011























































































































































































































































































































































Reviews:

No comments