manualshive.com logo in svg

Kia Forte 2011, Owner'S Manual, Page: 146 / 342

Share
Download
Kia Forte 2011 Owner'S Manual Download Page 146

Features of your vehicle

72

4

Instrument panel vents

The outlet vents can be opened or closed
separately using the thumbwheel.
Also, you can adjust the direction of air
delivered from these vents using the vent
control lever as shown.

D230102APB

Temperature control

The temperature control knob allows you
to control the temperature of the air flow-
ing from the ventilation system. To
change the air temperature in the pas-
senger compartment, turn the knob to
the right for warm air or left for cooler air.

D230103APB

Air intake control 

This is used to select outside (fresh) air
position or recirculated air position.
To change the air intake control position,
push the control button.

OTD049128

OTD049095

OTD049094

Summary of Contents for Forte 2011























































































































































































































































































































































Reviews:

No comments