manualshive.com logo in svg

Kia Forte 2011, Owner'S Manual, Page: 131 / 342

Share
Download
Kia Forte 2011 Owner'S Manual Download Page 131

4 57

Features of your vehicle

Press start button while turn steering 

If the steering wheel does not unlock nor-
mally when the ENGINE START/STOP
button is pressed, the warning illuminates
for 10 seconds on the LCD display. Also,
the warning chime sounds once and the
ENGINE START/STOP button light blinks
for 10 seconds.
When you are warned, press the
ENGINE START/STOP button while turn-
ing the steering wheel right and left.

Check steering wheel lock 

If the steering wheel does not lock nor-
mally when the ENGINE START/STOP
button turns to the OFF position, the
warning illuminates for 10 seconds on
the LCD display. Also, the ENGINE
START/STOP button light blinks for 10
seconds.

Summary of Contents for Forte 2011























































































































































































































































































































































Reviews:

No comments