manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 66 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 66

Features of your vehicle

88

4

D300101ATD

Antenna

Your vehicle uses a roof antenna to
receive both AM and FM broadcast sig-
nals. This antenna can be removed. To
remove the antenna, turn it counterclock-
wise. To install the antenna, turn it clock-
wise.

D300200AEN

Steering wheel audio control 
(if equipped) 

The steering wheel audio control button
is installed to promote safe driving.

AUDIO SYSTEM

OHM048154N

CAUTION

• Before entering a place with a low

height clearance, be sure that the
antenna is removed.

• Be sure to remove the antenna

before washing the vehicle in an
automatic car wash or it may be
damaged.

• When reinstalling your antenna, it

is important that it is fully tight-
ened and adjusted to the upright
position to ensure proper recep-
tion. But it could be removed
when parking the vehicle.

CAUTION

Do not operate the audio remote
control buttons simultaneously.

OTD049100

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments