manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 279 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 279

7 27

Maintenance

G130300ATD

Reset items

Items should be reset after the battery
has been discharged or the battery has
been disconnected.
• Auto down window (See section 4)
• Sunroof (See section 4)
• Trip computer (See section 4)
• Climate control system 

(See section 4)

• Clock (See section 4)
• Audio (See section 4)

(Continued)
• Disconnect the battery charger in

the following order.

1. Turn off the battery charger main

switch.

2. Unhook the negative clamp from

the negative battery terminal.

3. Unhook the positive clamp from

the positive battery terminal.

• Before performing maintenance

or recharging the battery, turn off
all accessories and stop the
engine.

• The negative battery cable must

be removed first and installed
last when the battery is discon-
nected.

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments