manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 267 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 267

7 15

Maintenance

Check the condition and connections of
all cooling system hoses and heater
hoses. Replace any swollen or deterio-
rated hoses.
The coolant level should be filled
between F (MAX) and L (MIN) marks on
the side of the coolant reservoir when the
engine is cool.
If the coolant level is low, add enough
specified coolant to provide protection
against freezing and corrosion. Bring the
level to F (MAX), but do not overfill. If fre-
quent coolant addition is required, see an
authorized KIA dealer for a cooling sys-
tem inspection.

G070101AHM-EU

Recommended engine coolant

• Use only soft (destilled) water in the

coolant mixture.

• The engine in your vehicle has alu-

minum engine parts and must be pro-
tected by an ethylene-glycol-based
coolant to prevent corrosion and freez-
ing.

• DO NOT USE alcohol or methanol

coolant or mix them with the specified
coolant.

• Do not use a solution that contains

more than 60% antifreeze or less than
35% antifreeze, which would reduce
the effectiveness of the solution.

For mixture percentage, refer to the fol-
lowing table.

OTD079050L

-15°C (5°F)

35

65

-25°C (-13°F)

40

60

-35°C (-31°F)

50

50

-45°C (-49°F)

60

40

Ambient

Temperature

Mixture Percentage (volume)

Antifreeze

Water

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments