manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 200 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 200

Driving your vehicle

16

5

For smooth operation, depress the brake
pedal when shifting from N (Neutral) to a
forward or reverse gear.

E060101ATD-EU

Transaxle ranges

The indicator light in the instrument clus-
ter displays the shift lever position when
the ignition switch is in the ON position.

P (Park)

Always come to a complete stop before
shifting into P (Park). This position locks
the transaxle and prevents the front
wheels from rotating.

WARNING

- Automatic

transaxle

• Always check the surrounding

areas near your vehicle for peo-
ple, especially children, before
shifting a shift lever into D (Drive)
or R (Reverse).

• Before leaving the driver’s seat,

always make sure the shift lever
is in the P (Park) position; then
set the parking brake fully and
shut the engine off. Unexpected
and sudden vehicle movement
can occur if these precautions
are not followed in the order iden-
tified.

CAUTION

• To avoid damage to your

transaxle, do not accelerate the
engine in R (Reverse) or any for-
ward gear position with the
brakes on.

• When stopped on an upgrade, do

not hold the vehicle with engine
power. Use the service brake or
the parking brake.

• Do not shift from N (Neutral) or P

(Park) into D (Drive),

or R

(Reverse) when the engine is
above idle speed.

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments