manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 193 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 193

5 9

Driving your vehicle

E040000APB

E040100ATD-EU

Starting the engine with an igni-
tion key (if equipped) 

1. Make sure the parking brake is

applied.

2. Manual Transaxle - Depress the

clutch pedal fully and shift the
transaxle into Neutral. Keep the clutch
pedal and brake pedal depressed
while turning the ignition switch to the
start position.
Automatic Transaxle - Place the
transaxle shift lever in P (Park).
Depress the brake pedal fully.

You can also start the engine when
the shift lever is in the N (Neutral)
position.

3. Turn the ignition switch to START and

hold it there until the engine starts (a
maximum of 10 seconds), then
release the key.

4. In extremely cold weather (below 

-18°C / 0°F) or after the vehicle has
not been operated for several days, let
the engine warm up without depress-
ing the accelerator.

Whether the engine is cold or warm, it
should be started without depressing
the accelerator.

STARTING THE  ENGINE

WARNING

Always wear appropriate shoes
when operating your vehicle.
Unsuitable shoes (high heels, ski
boots,etc.) may interfere with your
ability to use the brake, accelerator
pedal, and clutch (if equipped).

CAUTION

If the engine stalls while the vehicle
is in motion, do not attempt to move
the shift lever to the P (Park) posi-
tion. If traffic and road conditions
permit, you may put the shift lever
in the N (Neutral) position while the
vehicle is still moving and turn the
ignition switch to the START posi-
tion in an attempt to restart the
engine.

CAUTION

Do not engage the starter for more
than 10 seconds. If the engine stalls
or fails to start, wait 5 to 10 seconds
before re-engaging the starter.
Improper use of the starter may
damage it.

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments