manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 136 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 136

4 39

Features of your vehicle

D150204ATD

Fuel gauge

The fuel gauge indicates the approxi-
mate amount of fuel remaining in the fuel
tank. The fuel tank capacity is given in
section 8. The fuel gauge is supplement-
ed by a low fuel warning light, which will
illuminate when the fuel tank is nearly
empty.
On inclines or curves, the fuel gauge
pointer may fluctuate or the low fuel
warning light may come on earlier than
usual due to the movement of fuel in the
tank.

D150205ATD-EU

Odometer 

Odometer

The odometer indicates the total dis-
tance the vehicle has been driven.
You will also find the odometer useful to
determine when periodic maintenance
should be performed.

OTD049056

WARNING

- Fuel gauge

Running out of fuel can expose
vehicle occupants to danger.
You must stop and obtain addition-
al fuel as soon as possible after the
warning light comes on or when the
gauge indicator comes close to the
E level.

CAUTION

Avoid driving with extremely low
fuel level. Running out of fuel could
cause the engine to misfire, damag-
ing the catalytic converter.

OTD049058C

■

Type A

OTD049200

■

Type B

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments