manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 125 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 125

Features of your vehicle

28

4

D110200ATD

Tilting the sunroof  

To open the sunroof, push the tilt lever
(3) on the overhead console.
The sunroof will tilt only while the tilt lever
is pushed.
To close the sunroof, push the sunroof
control lever forward (2).

D110300ATD

Sunshade  

The sunshade will automatically open
when the glass panel is moved. Close it
manually if you want it closed.

OBK049019

WARNING - 

Sunroof

• Be careful that no heads, hands

and body parts are not obstruct-
ed by a closing sunroof.

• Do not extend the face, neck,

arms or body outside the sunroof
while driving.

• Make sure your hand and face are

safely out of the way before clos-
ing a sunroof.

CAUTION

• Periodically remove any dirt that

may accumulate on the guide rail.

• If you try to open the sunroof

when the temperature is below
freezing or when the sunroof is
covered with snow or ice, the
glass or the motor could be dam-
aged.

• The sunroof is made to slide

together with sunshade. Do not
leave the sunshade closed while
the sunroof is open.

OTD049017

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments