manualshive.com logo in svg

Kia Forte 2010, Owner'S Manual, Page: 123 / 327

Share
Download
Kia Forte 2010 Owner'S Manual Download Page 123

Features of your vehicle

26

4

D110000AHM-EE

If your vehicle is equipped with a sunroof,
you can slide or tilt your sunroof with the
sunroof control lever located on the over-
head console.

The sunroof can only be opened, closed,
or tilted when the ignition switch is in the
ON position.

✽

✽

NOTICE

• In cold and wet climates, the sunroof

may not work properly due to freez-
ing conditions.

• After the vehicle is washed or in a

rainstorm, be sure to wipe off any
water that is on the sunroof before
operating it.

✽

✽

NOTICE

The sunroof cannot slide when it is in
the tilt position nor can it be tilted while
in an open or slide position. 

SUNROOF (IF EQUIPPED)

OTD049015

CAUTION

Do not continue to press the sun-
roof control lever after the sunroof
is fully opened, closed, or tilted.
Damage to the motor or system
components could occur.

WARNING 

Never adjust the sunshade or sun-
roof while driving. This could result
in loss of control and an accident
that may cause death, serious
injury, or property damage.

Ofrecido por www.electromanuales.com

Summary of Contents for Forte 2010








































































































































































































































































































































Reviews:

No comments