manualshive.com logo in svg

Kia EV/ Plug-in Hybrid, Quick Reference Manual, Page: 10 / 15

Share
Download
Kia EV/ Plug-in Hybrid Quick Reference Manual Download Page 10

What to do in an emergency

If you have a flat tyre (With tyre mobility kit)

Please read the instructions before 

using the Tyre Mobility Kit.

1

  Compressor

2

  Sealant bottle

The Tyre Mobility Kit is a temporary fix 

to the tyre and have the tyre inspected 

by a professional workshop as soon as 

possible. Kia recommends to visit an 

authorised Kia dealer/service partner.
One sealant for one tyre 

Tyre Mobility Kit has only enough 

sealant for one flat tyre.

Refer to the owners manual for detailed 

instructions on the use of the TMK. 
Tyre wall 

Do not use the Tyre Mobility Kit to repair 

punctures in the tyre walls. This can result in 

an accident due to tyre failure. 
Do not use the TMK if a tyre is severely 

damaged.

 

Only punctured areas located within the tread 

region of the tyre can be sealed using the TMK.
After you ensured that the tyre is properly 

sealed you can drive cautiously on the tyre  

(up to 200 km) at a max. speed of 80 km/h.
It is possible that some tyres, especially with 

larger punctures or damage to the sidewall, 

cannot be sealed completely. 
The TMK is not designed or intended as a 

permanent tyre repair method and is to be 

used for one tyre only.

Before using the Tyre Mobility Kit, follow the 

instructions on the sealant bottle. 
Remove the label with the speed restriction 

from the sealant bottle and apply it to the 

steering wheel. 
Please note the expiry date on the sealant 

bottle. 
Do not let the compressor run for more than 

10 minutes, otherwise the device will overheat 

and may be damaged.
Notes on the safe use of the Tyre Mobility Kit

•   

Park your car at the side of the road so 

that you can work with the TMK away from 

moving traffic. ❈

•   

To be sure your vehicle will not move, even 

when you’re on fairly level ground, always 

set your parking brake. ❈

•   

Only use the TMK for sealing/inflation 

passenger car tyres.

WARNING

WARNING

1

2

Summary of Contents for EV/ Plug-in Hybrid
















Reviews:

No comments