manualshive.com logo in svg

Kia E-Soul, Owner'S Manual, Page: 418 / 574

Share
Download
Kia E-Soul Owner'S Manual Download Page 418

ROAD WARNING

Hazard warning flasher

The hazard warning flasher serves as a

warning to other drivers to exercise ex‐

treme caution when approaching, over‐

taking, or passing your vehicle.

It should be used whenever emergency

repairs are being made or when the ve‐

hicle  is  stopped  near  the  edge  of  a

roadway.

Depress  the  flasher  switch  with  the

START/STOP  button  in  any  position.

The flasher switch is located in the cen‐

ter console switch panel. All turn signal

lights will flash simultaneously.

• The hazard warning flasher operates

whether  your  vehicle  is  running  or

not.

• The  turn  signals  do  not  work  when

the hazard flasher is on.

• Care  must  be  taken  when  using  the

hazard warning flasher while the ve‐

hicle is being towed.

What to do in an emergency

 

 

7-02

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Reviews:

No comments