Kia E-Soul Owner'S Manual Download Page 54

Page: 54 / 574

ACTIONS TO BE TAKEN FOR ELECTRIC VEHICLE CHARGING ISSUES

When you cannot charge the high volt‐

age battery after connecting the

charger, check the following:

1. “Check the charging settings for

the vehicle” on page 1-11.

(e.g. when scheduled charging is

set, charging is not initiated imme‐

diately when the AC Charger or

portable charger is connected.)

2. Check the operation status of the

AC Charger, portable charger and

DC Charger.

“(Status of portable charger)” on

page 1-34.

❈

Actual method for indicating the

charging status may vary in ac‐

cordance with the charger manu‐

facturer.

3. When the vehicle does not charge

and a warning message appears on

the instrument cluster, check the

corresponding message. Warning

lamp and Indicator lamp (related to

electric vehicle)

p. 1-59

4. If the vehicle is properly charged

when charged with another nor‐

mally working charger, contact the

charger manufacturer.

5. If the vehicle does not charge when

charged with another normally

working charger, we recommend

that you contact an authorized Kia

dealers/service partner for inspec‐

tion.

Electric vehicle guide

1-48

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-Soul

Reviews:

Kia E-Soul, Owner'S Manual, Page: 54 / 574

Search results

Summary of Contents for E-Soul

Reviews: