Kia E-Soul Owner'S Manual Download Page 514

Page: 514 / 574

3. Install a new bulb in the socket.
4. Align the lens cover tabs with the

lamp housing notches and snap the

lens into place.

CAUTION

Be careful not to dirty or damage

the lens, lens tab, and plastic hous‐

ings.

Room lamp (LED type) bulb

replacement

If the room lamp (LED) (1), does not

operate, have your vehicle checked by a

professional workshop.

Kia recommends to visit an authorized

Kia dealer/service partner.

The LED lamps cannot be replaced as a

single unit because it is an integrated

unit. The LED lamps has to be replaced

with the unit.

A skilled technician should check or re‐

pair the room lamp (LED), for it may

damage related parts of the vehicle.

Vanity mirror lamp bulb

replacement

WARNING

Prior to working on the Interior

lamps, ensure that the “OFF” button

is depressed to avoid burning your

fingers or receiving an electric shock.

1. Using a flat-blade screwdriver, gen‐

tly pry the lamp assembly from in‐

terior.

2. Remove the bulb by pulling it

straight out.

Maintenance

8-64

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-Soul

Reviews:

Kia E-Soul, Owner'S Manual, Page: 514 / 574

Search results

Summary of Contents for E-Soul

Reviews: