Kia E-Soul Owner'S Manual Download Page 505

Page: 505 / 574

LIGHT BULBS

Bulb replacement precaution

Please prepare bulbs with appropriate

standards in case of emergencies. Re‐

fer to “Bulb Wattage” on page 9-06.

When changing bulbs and sorts, first

turn off the vehicle at a safe place,

firmly apply the side brake and take

out the battery's negative (-) terminal.

WARNING

Working on the lights

Prior to working on the light, firmly

apply the parking brake, ensure that

the vehicle START/STOP button is

turned to the LOCK position and turn

off the lights to avoid sudden move‐

ment of the vehicle and burning your

fingers or receiving an electric shock.

Use only the bulbs of the specified wat‐

tage.

WARNING

Be sure to replace the burnedout

bulb with one of the same wattage

rating. Otherwise, it may cause ex‐

tensive wiring damage and possible

fire.

CAUTION

If you don't have necessary tools,

the correct bulbs and the expertise,

consult a professional workshop. Kia

recommends to consult an author‐

ized Kia dealer/service partner. In

many cases, it is difficult to replace

vehicle light bulbs because other

parts of the vehicle must be re‐

moved before you can get to the

bulb. This is especially true if you

have to remove the headlight as‐

sembly to get to the bulb(s). Remov‐

ing/ installing the headlight assem‐

bly can result in damage to the vehi‐

cle.

CAUTION

• If unauthentic parts or substan‐

dard lights are used when chang‐

ing lights, it may lead to fuse dis‐

connection and malfunction, and

other wiring damages.

• Do not install extra lamps or LED

to the vehicle. If supplementary

lights are installed, it may lead to

lamp malfunction and flickering of

the lights. In addition, the fuse box

and other writing may be dam‐

aged.

• Lamp part malfunction due to net-

work failure

The headlamp, taillight, and fog light

may lit up when the head lamp

switch is turned ON, and not light up

when the taillight or for light switch

is turned ON. This may be cause by

network failure or vehicle electrical

control system malfunction. If there

is a problem, have the system serv‐

iced by a professional workshop. Kia

recommends to visit an authorized

Kia dealer/service partner.

8-55

Maintenance

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-Soul

Reviews:

Kia E-Soul, Owner'S Manual, Page: 505 / 574

Search results

Summary of Contents for E-Soul

Reviews: