manualshive.com logo in svg

Kia E-Soul, Owner'S Manual, Page: 466 / 574

Share
Download
Kia E-Soul Owner'S Manual Download Page 466

SEVERE DRIVING CONDITIONS

 A :   

Repeatedly driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in

freezing temperature.

 B :   

Extensive low speed driving for long distances.

 C :   

Driving on rough, dusty, muddy, unpaved, graveled or saltspread roads.

 D :   

Driving in areas using salt or other corrosive materials or in very cold weather

 E :   

Driving in heavy dust condition

 F :   

Driving in heavy traffic area

 G :   

Driving on uphill, downhill, or mountain roads.

 H :   

Towing a trailer or using a camper on roof rack.

 I :   

Driving for patrol car, taxi, commercial car or vehicle towing.

 J :   

Driving in very cold weather.

 K :   

Driving over 170 km/h (106 mile/h).

 L :  

Frequently driving in stop-and-go conditions.

 

Maintenance

 

 

8-16

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Reviews:

No comments