Kia E-Soul Owner'S Manual Download Page 438

Page: 438 / 574

Dinghy Towing

Your vehicle is not designed to be din‐

ghy towed (with 4 wheels on the

ground) behind a motor home. To avoid

serious damage to your vehicle, do not

tow your vehicle with four wheels on

the ground.

Removable towing hook (if

equipped)

1. Open the tailgate, and remove the

towing hook from the tool case.

2. Remove the hole cover pressing the

lower part of the cover on the

bumper.

3. Install the towing hook by turning it

clockwise into the hole until it is

fully secured.

4. Remove the towing hook and install

the cover after use.

What to do in an emergency

7-22

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-Soul

Reviews:

Kia E-Soul, Owner'S Manual, Page: 438 / 574

Search results

Summary of Contents for E-Soul

Reviews: