manualshive.com logo in svg

Kia E-Soul, Owner'S Manual, Page: 30 / 574

Share
Download
Kia E-Soul Owner'S Manual Download Page 30

CAUTION

In order to connect the charging con‐

nector,  release  the  door  lock  to  un‐

latch  the  charging  connector  lock

system.

If  not,  the  charging  connector  and

the  vehicle's  charging  inlet  may  be

damaged.

5. Check if there is any dust or foreign

substances on the charging connec‐

tor and charging inlet.

6. Hold the charging connector handle

and  connect  it  to  the  vehicle  AC

charging  inlet.  Push  the  connector

until  you  hear  a  "clicking"  sound.  If

the  charging  connector  and  charg‐

ing  terminal  are  not  connected

properly, this may cause a fire.

❈

For more information about how to

charge  and  how  to  disconnect,

please refer to the manual of each

AC Charger.

❈

The  shape  of  the  charging  connec‐

tor may be different for each man‐

ufacturer.

❈

Charging  Connector  AUTO/LOCK

Mode

When  the  charging  connector  and

the  charging  inlet  are  connected,

you can choose the mode by press‐

ing  button.  The charging connector

will  be  locked  at  a  different  time

depending on the selected mode.

LOCK  Mode:  When  the  charging

connector  is  properly  connected,

the  charging  connector  will  be  au‐

tomatically locked.

AUTO  Mode:  When  the  charging

connector  is  properly  connected

and charging is initiated, the charg‐

ing connector will be locked.

For  more  information,  refer  to  the

“Charging  connector  lock”  on  page

1-18.

7. Connect  the  charging  plug  to  the

electric  outlet  (220V)  at  a  AC

charging station to start charging.

8. Check  if  the  charge  indicator  lamp

of  the  high  voltage  battery  in  the

instrument  cluster  is  turned  ON.

Charging  does  not  occur  when  the

charging indicator lamp is OFF.

When  the  charging  connector  and

charging  plug  are  not  connected

properly,  reconnect  the  charging

cable to charge.

Electric vehicle guide

 

 

1-24

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Reviews:

No comments