manualshive.com logo in svg

Kia E-Soul, Owner'S Manual, Page: 216 / 574

Share
Download
Kia E-Soul Owner'S Manual Download Page 216

LED headlamp warning

light (if equipped)

This  warning  light  illumi‐

nates:

• When  the  START/STOP  button  is  in

the ON position.

- It  illuminates  for  approximately

3 seconds and then goes off.

• When there is a malfunction with the

LED headlamp.

In this case, have the vehicle inspected

by a professional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

This warning light blinks:

• When  there  is  a  malfunction  with  a

LED headlamp related part.

In this case, have the vehicle inspected

by a professional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner

CAUTION

n

LED Headlamp Warning Light

Continuous  driving  with  the  LED

Headlamp Warning Light on or blink‐

ing  can  reduce  LED  headlamp  (low

beam) life.

Forward Collision-

Avoidance Assist (FCA)

system warning light (if

equipped)

This indicator light illuminates:

• When  the  START/STOP  button  is  in

the ON position.

- It  illuminates  for  approximately

3 seconds and then goes off.

• When the FCA system is turned off.
• When  the  radar  sensor  or  cover  is

blocked  with  dirt  or  snow.  Check  the

sensor  and  cover  and  clean  them  by

using a soft cloth.

• When  there  is  a  malfunction  with

FCA.  If  this  occurs,  Kia  recommend

that  you  have  your  vehicle  inspected

by  an  authorized  Kia  dealer/service

partner.

❈

For more details, refer to “Forward

Collision-Avoidance  Assist  (FCA)

(radar  type)  (if  equipped)”

on page 6-46.

Indicator lights

Electronic Stability

Control (ESC) indicator

light (if equipped)

This  indicator  light  illumi‐

nates:

• When  the  START/STOP  button  is  in

the ON position.

- It  illuminates  for  approximately

3 seconds and then goes off.

• When there is a malfunction with the

ESC system.

In  this  case,  have  the  vehicle  inspec‐

ted  by  a  professional  workshop.  Kia

recommends  to  visit  an  authorized

Kia dealer/service partner.

This indicator light blinks:
While the ESC is operating.

❈

For more details, refer to “Electron‐

ic  Stability  Control  (ESC)”  on  page

6-36.

Features of your vehicle

 

 

5-74

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Reviews:

No comments