Kia E-Soul Owner'S Manual Download Page 191

Page: 191 / 574

Master warning mode

This warning light informs the driver

the following situations.

- LED headlamp malfunction (if equip‐

ped)

- Forward Collision-Avoidance Assist

system malfunction (if equipped)

- Forward Collision-Avoidance Assist

radar blocked (if equipped)

- Blind-Spot Collision Warning system

malfunction (if equipped)

- Blind-Spot Collision Warning radar

blocked (if equipped)

- Smart Cruise Control with Stop & Go

malfunction (if equipped)

- Smart Cruise Control with Stop & Go

radar blocked (if equipped)

- Lamp malfunction
- High Beam Assist malfunction (if

equipped)

At this time, a Master Warning icon

(

) will appear beside the User Set‐

tings icon ( ), on the LCD display. If the

warning situation is solved, the master

warning light will be turned off and the

Master Warning icon will disappear.

User settings mode

In this mode, you can change the set‐

tings of the instrument cluster, doors,

lamps, etc.

1. Head-up display
2. Driver Assistance
3. Door
4. Lights
5. Sound
6. Convenience
7. Service Interval
8. Other features
9. Reset

The information provided may differ

depending on which functions are appli‐

cable to your vehicle.

5-49

Featur

es of your v

ehicle

Summary of Contents for E-Soul































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E-Soul

Reviews:

Kia E-Soul, Owner'S Manual, Page: 191 / 574

Search results

Summary of Contents for E-Soul

Reviews: