manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 75 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 75

3 57

Safety features of your vehicle

Passenger’s front air bag 
ON indicator (if equipped)

The passenger's front air
bag ON indicator illumi-
nates for approximately 4
seconds after the ignition

switch is turned to the ON position.
The passenger's front air bag ON indi-
cator also comes on when the pas-
senger's front air bag ON/OFF switch
is set to the ON position and goes off
after approximately 60 seconds.

Passenger’s front air bag 
OFF indicator (if equipped)

The passenger’s front air
bag OFF indicator illumi-
nates for about 4 seconds
after the ignition switch is

turned to the ON position.
The passenger’s front air bag OFF
indicator also comes on when the
passenger’s front air bag ON/OFF
switch is set to the OFF position and
goes off when the  passenger’s front
air bag ON/OFF switch is set to the
ON position.

CAUTION

If the passenger’s front air bag
ON/OFF switch malfunctions,
the passenger’s front air bag
OFF indicator will not illuminate
(The passenger's front air bag
ON indicator comes on and goes
off after approximately 60 sec-
onds) and the passenger’s front
air bag will inflate in a frontal
impact even if the passenger’s
front air bag ON/OFF switch is
set to the OFF position.
If this occurs, we recommend
that the passenger’s front air
bag ON/OFF switch and the SRS
air bag system be inspected by
an authorised Kia dealer.

OYDESA2037R

OYDESA2038R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments